Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Kodiak's hub-and-rotor assembly makes it easy to change from drum brakes to disc brakes. Made of machined cast iron with an e-coating, this 1-piece unit is balanced for a smooth ride and furnished with standard races.
Features:
Specs:
Bearing, Race and Seal Information
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Kodiak 13" Hub and Rotor 8 on 6-12" pattern. It has an e-coat finish. 1/2" bolt size and a 7,000 pound weight capacity. Now this is a single piece assembly, makes installation a snap, whether you're retrofitting or switching from drum brakes. It has a machine process which will minimize runout and warping. Contaminants can't get in between the rotor and the hub when you're all one-piece. This is a balanced unit so it does provide a nice smooth ride, and if I turn this to the side you can see it is a vented design which will dissipate any heat, preventing any heat related damages. The studs are a 1/2" size wheel stud, and the industry standard bearing races are all included, they're pressed in, here's your outer bearing race, and if you spin it around you'll see the inner bearing race right there.
Now the bearings, the inner and outer bearings, the grease seal and the grease cap are all sold separately, and we do list the parts that you need on this product page at the bottom of the page. This rotor is a cast iron construction, ensures a favorable friction coefficient for necessary stopping power. The finish on it is an e-coat finish which provides corrosion resistance for fresh water and limited salt water use. This part is made in the USA. Again the specs on this. Designed to put an axle capacity of 7,000 pounds. Uses a wheel size of 16" and larger.
A bolt pattern on this is an 8 on 6-1/2" bolt pattern. The wheel bolt size is 1/2", and the rotor diameter, overall diameter on this is 13". That should do it for the review on the Kodiak 13" Hub and Rotor with the 8 on 6-1/2" bolt pattern and e-coat finish, 1/2' bolts and a 7,000 pound weight capacity.
Customer Satisfaction Score:
74% were satisfied with this product
26% of customers were not satisfied
Ratings & Reviews
Jimmy A.
2/5/2018
I am still very happy with the hydraulic disc brakes. Performance and wear of the brakes exceeds my expectations.
Jenny N.
10/28/2022
Thank you for sharing and for sending pictures. This provides the opportunity to share with our shipping department so that improvements can be made. Customer Service will be in touch to assist you.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Larry D.
8/19/2019
The Hub has been working out great. Pulled all hubs and calipers for a 3 year rebuild. Found out when sandblasting hubs the E-Coat hub was difficult to get all the E-Coating off so I could re-paint. Other then that no problems